Tamiya RC TA07 PRO Chassis Kit. 4WD Belt Drive On Road (TA). The upper frame allows for a symmetrical chassis design, which in turn helps to optimize chassis flex. Note: that front/rear stiffener, and center brace parts are attached separately to the integrated lower and side frame piece.
The efficient single belt winds back around the main and counter pulleys. Using one belt as opposed to two facilitates the changeable motor position feature. It allows simple reconstruction of the chassis using the existing belt rather than many different lengths. The 3 motor positions cover a total range of 52mm.
Changing motor positions is easy; just take off the cover, remove 2 screws, and re-attach the motor mount in the desired position. TRF419 suspension parts and gear differentials give top-level performance and reliability. Like on the TRF419, the servo mount is attached on one side only, with chassis flex in mind. The battery can be removed via the chassis side.Scale : 1/10 - Construction type : Assembly kit - Terrain use : On-road - Drive-train : 4WD - Drive type : Belt - Drive line : Universal - Differential type : Sealed oil-filled gear - Suspension : fully independent double wishbone - Steering mechanism : bell-crank - Shock damper : oil-filled damper - Shock damper material : Aluminum - Tire type : Not included - Body material : Not Included - Chassis material: FRP (Fiber Reinforced Plastic) - Electronic Speed Control (ESC) : not included - Motor : not included - Bearings : shielded ball bearing - Adjustable camber : yes - Adjustable toe angles : front and rear - Adjustable ground clearance : yes - Adjustable gear ratio : yes - Adjustable wheelbase : yes - Adjustable track width : yes - Adjustable shock angle : yes - Special feature 1 :Uses a composite lower deck/upper frame setup, as opposed to the TA06's monocoque. Lower deck and side frame parts are integrated, while upper frame center brace and F/R stiffener parts are separate. Special feature 2: Slim line lower deck piece features a skid-shaped underside to minimize contact with the track surface.
Special feature 3: Single belt-driven 4WD provides efficient acceleration. Special feature 4: Drivetrain utilizes 8 ball bearings.
Special feature 5: The motor can be switched between one of three positions, each with its own performance characteristics. Special feature 6: Utilizes race-proven TRF419 suspension, steering parts (same Ackerman geometry) and gear diff units. Special feature 7: Includes universal drive shafts, adjustable battery holder and TRF dampers.
Special feature 8: Battery is inserted from chassis side. Requires A: 2-channel radio gear - Requires B: 7.2 battery & charger - Requires C: Tires, body set, motor, esc - Requires D: Polycarbonate paint.This item is in the category "Toys & Hobbies\Radio Control & Control Line\RC Model Vehicles & Kits\Cars, Trucks & Motorcycles". The seller is "jazhobby" and is located in this country: HK. This item can be shipped worldwide.