Auto body collision repair rack which also acts as a mid rise lift for some brake and suspension work. Specifically designed for small to medium autos (Not trucks) with a very strong 10 ton 10 inch pulling tower. Twin heavy duty raise lower pistons powered by an air over hydraulic foot pedal pump with a giant steel reservoir with a 3.4 quart oil capacity.Flow control valve for smooth safe lowering. Air lock mechanism with twin tooth safety height position lock system. Momentary air switch attached to a high quality air cylinder to raise lower lock bar. Heavy duty 10 ton 10 inch stroke "Panther power tower" dozer style pull tower.
Powered by an air over hydraulic pump with hand held remote control. Machine comes with set of 10 assorted pulling tools, rubber pads for raise lower.4 top class pinch weld assemblies with cast jaws to attach automobile frame rails. Tower has 4 wheels (Versus 3) for stability and ease of movement. Machine bottom plate has over 6 holes to install the supplied and REQUIRED anchoring floor bolts.
FLAT LEVEL SMOOTH CONCRETE FLOOR REQUIRED WITH A MINIMUM 4 INCH DEPTH. IMPORTANT NOTE: Some very low profile cars will not clear minimum height of machine. A certain amount of ingenuity, cribbing and use of wood blocks for raising will be required by user. For very low clearance autos it is recommended to place wood ramps (2x6 wood planks) to drive onto in order to raise vehicle floor clearance to avoid damage to undercarriage and or machine.
Clean dry air supply required to power pumps with good PSI and CFM output capacity, small home compressors will not suffice. Affordably priced machine for light to medium body work, and also doubles as a mid rise lift.
Not recommended for autos with heavy frame - chassis damage. WITH OR RACK ITSELF: 35 INCHES. TOWER EXTENSION LENGTH: 20 INCHES.
Ships fully tested, and assembled on several pallets. FORK LIFT REQUIRED TO OFF LOAD. Machine could be picked up at local terminal using a flat bed with a roll off to place it in your shop. The item "FRAME MACHINE FOR CARS MID RISE LIFT WITH 10 TON PULLING TOWER BODY WORK REPAIRS" is in sale since Saturday, August 25, 2018. This item is in the category "eBay Motors\Automotive Tools & Supplies\Shop Equipment & Supplies\Auto Lifts & Frame Machines".
The seller is "t-p-h2015" and is located in Hallandale, Florida. This item can't be shipped, the buyer must pick up the item.